66” High Sides – High Capacity End Dump
Specifications
RANCO 66" High Side Demolition End Dump
38' Overall Length
36' Useable Tub Length
45 Cubic Yards
HYDRAULICS & DRAFT ARMS
Outboard Cylinder (No Doghouse)
Inverted Hydraulic Cylinder
46° Dump Angle with All Axles on the Ground
BODY
AR400 Steel Construction
¼" Tub Forward Sections
5/16" Last Section upon request
66" Side Height
"Z" Brace Seam Strengthener
(3) Tapered Bolsters
Oscillating Kingpin
15' Draft Arms
4" Heavy Duty Rubber Bushed Hinges
TAILGATE
2-Way Tailgate (swing/barn door)
76" Ground Clearance
Single Brace Tailgate
50,000# Tailgate
4" x 8" Gate Lock
UNDERCARRIAGE
Hutch H-903 Suspension
Tandem 22,500# Axles - 102" Wide
Maxi-Cans Mounted on top of the Axles
Outboard Hubs / 16½" x 7" Brakes
Frameless End Dump
4-On-The-Floor Dumping (Both Axles Stay on the Ground)
Continental HSR 11R24.5 Tires on 10-Hole Steel Disc Wheels
OTHER
Bolt-On Front & Rear Fenders
Telescopic Drop Legs
Ladder Mounted on Forward Bulkhead
LED Lights
Back-up Alarm
Sand Blast, Print and Paint
Feature/Benefits
FEATURE, BENEFITS AND COMPARISIONS- The Anvil’s constant radius half-round shape.
- The Anvil’s body is fabricated from AR400 abrasion resisting heat treated alloy steel.
- The thickness of Anvil’s body shell increases at the rear of the body.
- Body seams are reinforced with a continuous welded “Z” brace.
- The self shedding angled top rail design.
- A radius flanged front bulkhead.
- Anvil’s thick walled, closed boxed structural sections.
- The Anvil has a vertical, rear body cut off and rear bolster.
- All bolsters are tapered inward at the bottom.
- The suspension sub-frame includes a front bolster in addition to the rear bolster.
- Inverted, trunnion style, hydraulic dump cylinder.
- The Anvil end dump is designed to dump entirely by rotating around the single point tandem suspension trunnion.
- The Anvil has a fully adjustable, over-center locking gate latch powered by a double acting 4" diameter air cylinder.
- Rugged high lift tailgate and hinge design.
- Mud flaps are hinged and mounted to the tailgate with heavy duty brackets.
- The Anvil uses wide trac axles.
- The Anvil is equipped with bolt-on front and rear fenders.